RaceTech cartridge emulators

[Paul Heim]

RaceTech's spacer tubes are schedule 40 PVC pipe.  You can play with fork 
preload for cheap if you just buy a stick of pipe and play with the length.

-----Original Message----- 
From: Charles Scappaticci
Sent: Thursday, June 30, 2011 7:31 PM
To: Paul Heim
Subject: Re: RaceTech cartridge emulators

Bill,

Yes, I cut them the off to compensate for the emulators.  I was happy
with the sag/preload so I just compensated for the difference.  Race
Tech sells the spacing tubes or you can cut your stock ones.

Charles S.

On Thu, Jun 30, 2011 at 12:37 PM, William K Denton <wkdenton at verizon.net> 
wrote:
> Charles,
>
> Did you cut down the spacers above the springs in your forks to account 
> for
> the added height of the emulators when you installed them?
>
> Bill Denton
> Yardley, PA
> wkdenton at verizon.net
> Lazarus Cycleworks, LLC
> We Breathe New Life into Old Bikes
>
______________________________________________________________________
GENERAL GPZList MAILING LIST INFORMATION:
This is from the GPZList mailing list. GPZList at micapeak.com
http://micapeak.com/mailman/listinfo/gpzlist
You subscribed to this mailing list. Therefore, you solicited all
mail that you receive from this list. Therefore, ANY mail that you
receive from this list is, by definition, NOT Spam, and if you report
it as such, you are violating the micapeak.com terms of service.

To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
______________________________________________________________________
YOUR PERSONAL SUBSCRIBER OPTIONS:
Unsubscribe or choose new options at
http://micapeak.com/mailman/options/gpzlist/pmheimjr%40gmail.com
You are subscribed at the email address pmheimjr at gmail.com
______________________________________________________________________