[BaseCamp] [LDRider] WOTL Needed for BaseCamp

[Nancy Lefcourt]

> On May 27, 2017, at 10:06 AM, Carroll <carrollwalker at cox.net> wrote:
> 
> Greg, I think I understand what you are saying and how you are interpolating the option.  Your view is much different then how I was looking at it and your way might be more accurate than mine.  The thing I want to do is build a route in BaseCamp and transfer it to a GPS and the GPS display the route exactly how it was in the computer, this is assuming the map set in the computer and the GPS are the same version.  If I build a route in the computer/BaseCamp and confirm it follows all the roads I am interested in, when I transfer it to a GPS, I don't want the GPS to re-route on roads different than the computer/BaseCamp route.  I don't think the option I quoted will do this. I have wrote a routine I use when transferring routes to my GPS that seem to make the GPS route follow the route from the computer.  I mentioned the option I quote because I didn't understand it.
> Thanks for your viewpoint.
> 
>> -----Original Message-----
>> From: Greg Horodeck [mailto:greghoro at gmail.com]
>> Sent: Friday, May 26, 2017 11:09 AM
>> To: 'BaseCamp'; 'BaseCamp'; 'LDRider-List'
>> Subject: Re: [LDRider] [BaseCamp] WOTL Needed for BaseCamp
>> 
>> I read "Always match route to the map on my device when transferring" a
>> different way. Note, a Garmin GPS can have more than one map version or
>> even map type (road, marine, topographic) in it at any given time. I've seen
>> instances of people having a new version of a map on an external card while
>> they have an older version in internal memory; not wanting to "brick" their
>> GPS trying to put a newer map into internal memory.
>> 
>> So, the way I read the option is that either it is making sure that the map you
>> created the route on in BaseCamp exists in the GPS or that when you invoke
>> the route transferred in the GPS, it uses the map that it was created with in
>> BaseCamp.  I've had problems with my GPSMap 478 when I upgraded the
>> maps but used an elaborate route with lots of shaping points route built in
>> BaseCamp and transferred to the GPS prior to updating the maps on the GPS.
>> 
>> You state "What I would like to do is match the route in the GPS to the route I
>> built in BaseCamp on the computer". I'm a bit confused by this, what is your
>> goal?
>> 
>> 
>> Greg
>> 
>> 
>> -----Original Message-----
>> From: Basecamp [mailto:basecamp-bounces at lists.micapeak.com] On Behalf
>> Of Carroll
>> Sent: Friday, May 26, 2017 11:55 AM
>> To: 'BaseCamp'; LDRider-List
>> Subject: [BaseCamp] WOTL Needed for BaseCamp
>> 
>> When using BaseCamp, there is a route option that reads; "Always match
>> route to the map on my device when transferring".
>> 
>> The definition of this option sounds like it is matching the route in the
>> computer/BaseCamp to the route in the GPS.
>> 
>> "Transferring a route from the GPS to the computer"
>> 
>> What I would like to do is match the route in the GPS to the route I built in
>> BaseCamp on the computer.
>> 
>> Maybe I am looking at the wrong option or I am interpolating the description
>> wrong?
>> 
>> The option in question can be found like this:
>> 
>> Right click a route and select "Open".
>> 
>> Select "Route Options"
>> 
>> Select "Use Activity Profile"
>> 
>> Select "Edit Profile"
>> 
>> Select "Device Transfer"
>> 
>> It will be the middle option under "Transferring Routes"
>> 
>> 
>> 
>> 
>> To make _ANY_ changes, including unsubscribing from this list, click -----
>>> http://micapeak.com/mailman/listinfo/basecamp
>> 
>> 
>> 
> 
> 
> 
> To make _ANY_ changes, including unsubscribing from this list, click ----->http://micapeak.com/mailman/listinfo/basecamp
>