From ironbutter at gmail.com  Mon Dec 30 06:19:47 2019
From: ironbutter at gmail.com (saddle sore)
Date: Mon, 30 Dec 2019 09:19:47 -0500
Subject: [BaseCamp] moving waypoints in a BC route
Message-ID: <CAKdj8Cqe+qmHsWaUNoeQWK=L04gOGSXb86ji3YjaFa+btz1XFg@mail.gmail.com>

Hi

With the route properties box open, and a specific waypoint highlighted,
the up and down arrows on the right side allow me to move a single
waypoint's position in the route.

If I want to move a group of 6-8 waypoints together as a group to another
spot in the route, the up and down arrows don't allow more than moving one
waypoint at a time.  Well, at least I can't get the up/down arrows to work
on more than one highlighted waypoint at a time.  Can you?

Is there a way to move a group of waypoints inside a route, as a group, to
another part of the route?  Moving 6-8 waypoints, one at a time, down the
route properties list some 20-30 spots, gets tedious.  Being able to move a
group, all at once, would be great.  Ideas?

Thanks,

Joe Y
western PA

From denniscodell at icloud.com  Mon Dec 30 07:14:56 2019
From: denniscodell at icloud.com (DENNIS O'DELL)
Date: Mon, 30 Dec 2019 16:14:56 +0100
Subject: [BaseCamp] moving waypoints in a BC route
In-Reply-To: <CAKdj8Cqe+qmHsWaUNoeQWK=L04gOGSXb86ji3YjaFa+btz1XFg@mail.gmail.com>
References: <CAKdj8Cqe+qmHsWaUNoeQWK=L04gOGSXb86ji3YjaFa+btz1XFg@mail.gmail.com>
Message-ID: <0764D2B6-5BE4-471E-B5FD-7B161EB8DC41@icloud.com>

I’m using BC on a Mac, and found the following.

In the route properties box, select two or more way points by Shift+Click or Command+Click. Then drag them or use command+up/down arrows on the keyboard to move them as a group to the desired position.

I do not see up/down arrows within the route properties box when a waypoint is selected, so this is a PC thing I imagine. 


Mit freundlichen Grüßen / Best Regards,

Dennis C. O'Dell


> On 30. Dec 2019, at 15:19, saddle sore <ironbutter at gmail.com> wrote:
> 
> Hi
> 
> With the route properties box open, and a specific waypoint highlighted,
> the up and down arrows on the right side allow me to move a single
> waypoint's position in the route.
> 
> If I want to move a group of 6-8 waypoints together as a group to another
> spot in the route, the up and down arrows don't allow more than moving one
> waypoint at a time.  Well, at least I can't get the up/down arrows to work
> on more than one highlighted waypoint at a time.  Can you?
> 
> Is there a way to move a group of waypoints inside a route, as a group, to
> another part of the route?  Moving 6-8 waypoints, one at a time, down the
> route properties list some 20-30 spots, gets tedious.  Being able to move a
> group, all at once, would be great.  Ideas?
> 
> Thanks,
> 
> Joe Y
> western PA
> 
> To make _ANY_ changes, including unsubscribing from this list, click ----->http://micapeak.com/mailman/listinfo/basecamp
> 


From edb4378 at gmail.com  Mon Dec 30 08:31:23 2019
From: edb4378 at gmail.com (Eric Bray)
Date: Mon, 30 Dec 2019 11:31:23 -0500
Subject: [BaseCamp] moving waypoints in a BC route
In-Reply-To: <0764D2B6-5BE4-471E-B5FD-7B161EB8DC41@icloud.com>
References: <CAKdj8Cqe+qmHsWaUNoeQWK=L04gOGSXb86ji3YjaFa+btz1XFg@mail.gmail.com>
 <0764D2B6-5BE4-471E-B5FD-7B161EB8DC41@icloud.com>
Message-ID: <CAF0OwFD2GbRpVYO-XRJ7ch1Ak_x4ESrwkaK47jMfnujHdUkdJQ@mail.gmail.com>

It works on a PC.

(1) Select the first waypoint
(2) Hold down the Shift key while selecting the last waypoint in the
string, all the waypoints you want to move should now be highlighted
(3) Drag them to where you want them within the route

Eric Bray
Alexandria, VA

On Mon, Dec 30, 2019 at 10:15 AM DENNIS O'DELL <denniscodell at icloud.com>
wrote:

> I’m using BC on a Mac, and found the following.
>
> In the route properties box, select two or more way points by Shift+Click
> or Command+Click. Then drag them or use command+up/down arrows on the
> keyboard to move them as a group to the desired position.
>
> I do not see up/down arrows within the route properties box when a
> waypoint is selected, so this is a PC thing I imagine.
>
>
> Mit freundlichen Grüßen / Best Regards,
>
> Dennis C. O'Dell
>
>
>
>

From ironbutter at gmail.com  Mon Dec 30 18:20:19 2019
From: ironbutter at gmail.com (saddle sore)
Date: Mon, 30 Dec 2019 21:20:19 -0500
Subject: [BaseCamp] moving waypoints in a BC route
In-Reply-To: <CAF0OwFD2GbRpVYO-XRJ7ch1Ak_x4ESrwkaK47jMfnujHdUkdJQ@mail.gmail.com>
References: <CAKdj8Cqe+qmHsWaUNoeQWK=L04gOGSXb86ji3YjaFa+btz1XFg@mail.gmail.com>
 <0764D2B6-5BE4-471E-B5FD-7B161EB8DC41@icloud.com>
 <CAF0OwFD2GbRpVYO-XRJ7ch1Ak_x4ESrwkaK47jMfnujHdUkdJQ@mail.gmail.com>
Message-ID: <CAKdj8CqhBLwgZUcEjStmq4=h6RgOqcQySHgU3jAHq0-N4OcVhg@mail.gmail.com>

The drag n drop advice didn't work for me.  Not sure why.  But, I did
realize that after the multiple waypoints are selected, or highlights, a
right click on the mouse brings up a box of options. Select the COPY
option.  Then scroll down the route list of waypoints and highlight one
waypoint right where the copies ones should be placed.  Right click mouse,
select the PASTE option.  That worked for me.

Thanks all.




On Mon, Dec 30, 2019 at 11:31 AM Eric Bray <edb4378 at gmail.com> wrote:

> It works on a PC.
>
> (1) Select the first waypoint
> (2) Hold down the Shift key while selecting the last waypoint in the
> string, all the waypoints you want to move should now be highlighted
> (3) Drag them to where you want them within the route
>
> Eric Bray
> Alexandria, VA
>
> On Mon, Dec 30, 2019 at 10:15 AM DENNIS O'DELL <denniscodell at icloud.com>
> wrote:
>
> > I’m using BC on a Mac, and found the following.
> >
> > In the route properties box, select two or more way points by Shift+Click
> > or Command+Click. Then drag them or use command+up/down arrows on the
> > keyboard to move them as a group to the desired position.
> >
> > I do not see up/down arrows within the route properties box when a
> > waypoint is selected, so this is a PC thing I imagine.
> >
> >
> > Mit freundlichen Grüßen / Best Regards,
> >
> > Dennis C. O'Dell
> >
> >
> >
> >
>
> To make _ANY_ changes, including unsubscribing from this list, click ----->
> http://micapeak.com/mailman/listinfo/basecamp
>
>