Headlight Modulator

[Steve Northrop]

Simon, the factory default works just fine. I have a window in my garage. 
When I ride into the garage, the headlight stops modulating until I ride by 
the window, then it starts again. When I get past the window it stops again. 
The light sensor is pretty sensitive.

Steve in Western NY
'96 GPZ1100
'02 Daytona 955i
"You Can't Fix Stupid", Ron White

----- Original Message ----- 
From: "Simon White" <swhite at consultant.com>
To: <gpzlist at micapeak.com>
Sent: Tuesday, May 15, 2007 12:24 AM
Subject: Re: Headlight Modulator


> Coming out of lurk mode for a moment..
>
> The adjustment would be a bit tricky on our bikes, no? "If you turn the 
> high beam on and turn the ignition on three times quickly the 
> microprocessor takes that as an input and changes the sensitivity". With 
> the switching on the GPZ which only turns the headlight on after the 
> engine starts, how would it be possible to adjust the modulator? You'd 
> need good reflexes to start the engine & kill it "three times quickly".
>
> Were you able to work around that, Steve? Or is the factory default 
> enough?
>
> ..and back to my cave I go.
>
> Simon
> '95 GPz1100 - Blue and quick enough..
> Melbourne, Australia
> How we spend our days is, of course, how we spend our lives.
>
>> ----- Original Message -----
>> From: "Steve Northrop" <blackgpz at rochester.rr.com>
>> To: gpzlist at micapeak.com
>> Subject: Re: Headlight Modulator
>> Date: Mon, 14 May 2007 22:46:37 -0400
>>
>>
>> This is the one I have.
>>
>> http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Product_Code=322&Category_Code=KISA
>>
>>
>> Steve in Western NY
>> '96 GPZ1100
>> '02 Daytona 955i
>> "You Can't Fix Stupid", Ron White
>
> =
>