Valve Cover Gasket

[Buehrle, Michael]

A little smudge of silicone around the corners by the cam ends and a little to hold the figure eight shaped gaskets at the centre of the cover. Observe the  cross pattern tightening sequence in your manual & torque values , they are very low and over doing it will cause leaks. It is rare to have to replace this gasket but not inconceivable.
Mike B.

-----Original Message-----
From: Jeffrey Markham [mailto:automan25 at yahoo.com]
Sent: May 28,2007 12:42 PM
To: GPzList at micapeak.com
Subject: Valve Cover Gasket


Well, I adjusted the valves on my GPz. The engine still runs so I guess that's good news. The valve cover gasket is now leaking however. I reused the old gasket and put silicone sealant on the upper edges of the gasket and the lower edges of the valve cover. Same for the spark plug shaft gaskets. Those are probably leaking as well though I haven't stripped it all down to take a look. I'm a little too frustrated to do that right now; I'm sick of working on the bike, I just want to ride. Anyway, how do I fix this? Should I get a new gasket(s)? Should I use silicone sealant at all? Any thoughts would be helpful.

Thanks,

-Jeff Markham
 
Jeffrey R. Markham 
Digital Designer 
automan25.com


       
____________________________________________________________________________________Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow  

This e-mail originates from the City of Ottawa e-mail 
system. Any distribution, use or copying of this e-mail or 
the information it contains by other than the intended 
recipient(s) is unauthorized. If you are not the intended 
recipient, please notify me at the telephone number shown 
above or by return e-mail and delete this communication and 
any copy immediately. Thank you.

Le présent courriel a été expédié par le système de 
courriels de la Ville d'Ottawa. Toute distribution, 
utilisation ou reproduction du courriel ou des 
renseignements qui s'y trouvent par une personne autre que 
son destinataire prévu est interdite. Si vous avez reçu le 
message par erreur, veuillez m'en aviser par téléphone (au 
numéro précité) ou par courriel, puis supprimer sans délai 
la version originale de la communication ainsi que toutes 
ses copies. Je vous remercie de votre collaboration.