LSL handle bar risers and handle bars

[Dave Daniels]

At Spiegler in Dayton, they only offer one type of handlebars. And they are too wide and flat for my taste. I put ZRX bars on mine. The stock bar ends screw right into them.

Barblan <barblan at gmx.ch> wrote:  LSL still produces them.
They also offer 3 different types of handle bars, low. middle and high.
At the moment I enjoy riding with the hight one.
The low one was smashed in the crash last year ...

The bar was a bit too wide for me, so I cut of about 2.5 cm on booth sides.

For my second GPZ (the one in restoration) I also bought a set.
If I remember correctly the bar was about 70 CHF and the risers were 
some 360.- CHF.
Pretty steep!

George, Thun, Switzerland, at 31 C

-------------- next part --------------
A non-text attachment was scrubbed...
Name: LSL conversion high 02.JPG
Type: image/jpeg
Size: 229716 bytes
Desc: not available
Url : http://micapeak.com/pipermail/gpzlist/attachments/20080626/9c9baea7/attachment.jpe 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: LSL conversion high 01.JPG
Type: image/jpeg
Size: 173114 bytes
Desc: not available
Url : http://micapeak.com/pipermail/gpzlist/attachments/20080626/9c9baea7/attachment-0001.jpe