Fw: ZZR1200 Header

[shampson]

I have a remus full system from a zx11 on my Gpz, Fitted no problem with the
exception of having to bend the bracket for the main stand stop, just so it
lifted further up of of the way. One thing to bear in mind I believe the
Zx11 has a curved radiator which brings it closer to the headers where as
ours is straight so you should have more clearance.

Steve

-----Original Message-----
From: 1KPerDay [mailto:1kperday at gmail.com] 
Sent: 04 September 2008 17:26
Cc: GPZ List
Subject: Re: Fw: ZZR1200 Header

Paul, forgot to mention that the only other issue I've heard of is the
bumper for the center stand being different... some guys have either
removed the centerstand or fabbed a simple bumper using a hose clamp
or something.

If you do this make sure you take detailed pics and write everything
down; I have a spare ZZR header ready to go on my GPz (and some
staintune cans... yummy) if/when the stocker wears out and could
certainly benefit from your experience. :)

I'm going to post your question on the ZZR board; bet someone there
has at least done this to a ZX-11.

On Thu, Sep 4, 2008 at 10:01 AM, Paul S. Elsberry
<pselsberry at comcast.net> wrote:

> If you have any info on this being done or known issues on this set up let
> me know.
-- 
Utah Jeff
'96 SheePz1100
No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.169 / Virus Database: 270.6.16/1650 - Release Date: 03/09/2008
16:13