Laminar lip?

[blackgpz at rochester.rr.com]

I have one on my KLR with the stock windscreen. Marginal improvement over the tall Kawi screen but still not good, a lot of wind noise and buffeting. My next try will be the tall Kawi screen with the Laminar Lip. I think that might be the ticket. They actually make one for my new Tuono but it's too ugly for a bike that pretty!

Steve

---- "dominatr37 at optonline.net" <dominatr37 at optonline.net> wrote: 
> The product is actually called the laminar lip
> -----Original Message-----
> Date: Thursday, April 30, 2009 9:42:40 am
> To: 1kperday at gmail.com
> Cc: GPZ List <gpzlist at micapeak.com>
> From: JOHN SOLIDAY <johnsoliday at msn.com>
> Subject: RE: Laminar lip?
> 
> 
> Are we talking about the unit made by Saeng or something like that?  I haven't noticed other types...
> 
> > Date: Wed, 29 Apr 2009 13:38:54 -0600
> > Subject: Re: Laminar lip?
> > From: 1kperday at gmail.com
> > CC: gpzlist at micapeak.com
> > 
> > I had one on the ZZR12, worked as described, but raised the blast to my
> > faceshield. I took it off. Mine was the "touring" version which is larger
> > than the standard version. I don't believe they make a touring version for
> > the GPz, just the standard size.
> > 
> > After trying multiple screens, I've determined that I much prefer clean
> > windblast to the helmet over almost anything else. I've never been able to
> > find a screen that doesn't rumble my helmet. On a long day that becomes very
> > tiring. If you want to try the Zero Gravity ST screen I'll sell you mine. ;)
> > 
> > Mr. Soliday must have tried something other than the Laminar Lip, which
> > screws and velcros to the stock screen (depending on which bike) using the
> > rearmost fairing/windscreen screws.
> > 
> > On
>