Bar risers Gen Mar

[Dave Daniels]

So, they are thicker on the outside?

--- On Wed, 1/14/09, Les Johnson <jjohnsonlta at gmail.com> wrote:

From: Les Johnson <jjohnsonlta at gmail.com>
Subject: Bar risers Gen Mar
To: gpzlist at micapeak.com
Date: Wednesday, January 14, 2009, 9:52 AM

     I did a little mod that I really think made a difference to me. I took
my Gen Mar risers and cut the bottom in a wedge shape. I went from 5/16 to
zero by cutting them with a hack saw. I then smoothed a couple spots with a
file till they fit good on top of the forks where they go. The 5/16 being
the part of the riser that is closest to the center of the fork. This gained
a good 3/4 in rise at the end of the bars. It makes it so the bars are not
angled down as far. 3/4 does not sound like much but I can sure notice a
difference. It a low cost way of gaining a little more comfort.

    Les J.