blow up of balancer

[Dave Daniels]

If I remember correctly, you have to remove an oil line that goes from around that area down to the front of the pan. Not a real problem. You just need to get some new banjo washers to put it back on. Other than that, it's easy.

--- On Thu, 7/16/09, Jay Loeppke <jloeppke at charter.net> wrote:


From: Jay Loeppke <jloeppke at charter.net>
Subject: Re: blow up of balancer
To: "Dave Daniels" <dwaynedaniels at sbcglobal.net>, "GPZ LIST" <gpzlist at micapeak.com>
Date: Thursday, July 16, 2009, 12:24 AM


Is the balancer seal hard to replace?

Thanks
On Jul 15, 2009, at 7:29 PM, Dave Daniels wrote:

> Here's a blow up of the balancer from bikebandit's website. All you will see though are parts 92002, 13168,0132 & 92049, which are at the bottm right corner of the picture. 92049 is one of the seals that a lot of folks have leak problems with.
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 1995ZX1100E1US_E1323.gif
> Type: image/gif
> Size: 92886 bytes
> Desc: not available
> Url : http://micapeak.com/pipermail/gpzlist/attachments/20090715/4e5e91ba/attachment.gif