Cheap Turn Signals

[andy burkard]

wierd - these don't look like the stock front turn signals.  mine is under a cover, but i don't recall that ugly screw holding on the orange lens.  i'm guessing these are either a chinese knock-off, or maybe from the EX500?  i think the blinkers from the 500 are the same, no?

ya, at those fairing prices, there's probably a future in plastic welding, if you were so inclined to learn how.  over the last year, i went and bought a mig welder (had to have it, ya know) and it has opened up a whole new world of "garage tinkering" projects.  between the welder, and a few winches, i've managed to put together my mcgyver solution for storing a 16' hobie cat (sail boat) in my garage... hung from the ceiling above the truck...  ya, my neighbors all concur that i have too much time to think...

ab

--- On Tue, 4/13/10, John Soliday <johnsoliday at msn.com> wrote:

> From: John Soliday <johnsoliday at msn.com>
> Subject: Cheap Turn Signals
> To: "'GPZ List'" <gpzlist at micapeak.com>
> Date: Tuesday, April 13, 2010, 8:01 PM
> Just saw this on ebay if anybody is
> looking.  By the way the upper fairing
> is now ~$750 and the lower fairing pieces are now ~$400,
> jeez,...you can
> probably fabricate or JB Weld anything and have it custome
> painted for THOSE
> prices.
> 
>  
> 
> John
> 
>  
> 
> http://cgi.ebay.com/ebaymotors/95-96-97-KAWASAKI-GPz1100-GPz-1100-Front-Turn
> -Signal_W0QQcmdZViewItemQQhashZitem3a56f54e50QQitemZ250567020112QQptZMotorcy
> clesQ5fPartsQ5fAccessories#ht_3223wt_939
> 
>