Out of lurk mode............SHIMS

[John Soliday]

Send the guy and email, he had a ZX11C kit on awhile back and if you check
on bike bandit you can confirm the shim part numbers for the ZX11C and GPZ
are the same.  I'm not sure about the ZZR1200 but you could do they same
comparison based on common factory P/Ns for the shims.  

Good Luck,

john

-----Original Message-----
From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com] On
Behalf Of Tom Wheeler
Sent: Thursday, July 01, 2010 6:40 PM
To: gpzlist at micapeak.com
Subject: RE: Out of lurk mode............SHIMS


http://cgi.ebay.com/ebaymotors/92-00-KAWASAKI-ZR1100-ZR-1100-HOTCAMS-VALVE-S
HIM-KIT-_W0QQcmdZViewItemQQhashZitem53d8dd6d22QQitemZ360120675618QQptZMotorc
yclesQ5fPartsQ5fAccessories

 

This is all I could find.

 

Tom

 

 

 


 
> From: johnsoliday at msn.com
> To: gpzlist at micapeak.com
> Subject: RE: Out of lurk mode............SHIMS
> Date: Thu, 1 Jul 2010 17:54:36 -0600
> 
> This is a company called "Hotcams" on ebay that has shim sets for the
ZX11C
> which should fit our bikes. I was watching it for awhile, it was at $68
for
> the whole set but sold. I may wait until winter and do the mix and match
> and just go down to the stealer and buy what I need.
> 
> John
> 
> -----Original Message-----
> From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com]
On
> Behalf Of Rickard Olsson
> Sent: Thursday, July 01, 2010 5:44 PM
> To: GPZ List
> Subject: Re: Out of lurk mode............SHIMS
> 
> Tom Wheeler skrev:
> > I haven't riden for about a year, and when I parked her, she was running
> rough. When I bought it there was ~9000 miles, and not there are 21000. I
> have never done a shim adj/replacement. I am sure this makes me a very bad
> person on some level over the last 6 years or so. I have the factory
> manual, but no parts. 
> > 
> 
> The valve shim calculator is still online at 
> http://www.gpz1100.com/valves but I didn't find the shim swap manual 
> right now...
> 
> / Richie
>