Ultra sonic cleaners

[art.robinson]

Isn't that just the truth.....

A friend of mine is in the design business and was working a test
fixture to determine the life of a Cadillac window operator. The main
drive was a small electric motor which cost $110 each and the owner went
through quite a few of them. 

My friend conducted a search for a replacement and came up with the
identical motor as supplied to GM. When he tried to buy a quantity of
50, the supplier said it wasn't worth his while to process the invoice
and sent the 50 gratis! 

Ever get the feeling we are being royally ripped off!!?

Art 

-----Original Message-----
From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com]
On Behalf Of Marilyn Mason
Sent: 25 April 2011 10:49
To: Art Robinson
Subject: Ultra sonic cleaners

$30.00 sounds like a bargin.  The 1.5 gal Branson I used at work was
nearly 
$1000.00.  But we were in the nuclear business and everything we got
seemed 
to have the price jacked up.
I needed a coolant pump for a Buehler diamond saw and it was $129.95
from 
Buehler .  I found the same pump at Walmart meant for a garden waterfall
for 
$19.97.

Jim
----- Original Message ----- 
From: "John Soliday" <johnsoliday at msn.com>
To: "Jim Mason" <MASONJS at nrtco.net>
Cc: "'Charles Scappaticci'" <scapco at ecentral.com>
Sent: Monday, April 25, 2011 9:40 AM
Subject: RE: Hard (impossible) to start


>I got an ultrasonic cleaner at Harbor Freight for ~$30.  I haven't used
it
> on carbs, but it seems to do a good job of cleaning my girl friends 
> jewelry.
>
> -----Original Message-----
> From: gpzlist-bounces at micapeak.com
[mailto:gpzlist-bounces at micapeak.com] 
> On
> Behalf Of Steven Bixby
> Sent: Sunday, April 24, 2011 1:34 PM
> To: John Soliday
> Cc: Charles Scappaticci
> Subject: Re: Hard (impossible) to start
>
> I wonder if the typical ultrasonic cleaner rigs you can get on the
> consumer market would do the job?  Or do they have some special
> heavy-duty-industrial-waste-capable,
> nuculear-powered-atomic-blast-resistant units?
>
> I've wanted to get a reasonably capable ultrasonic cleaner for home
use,
> perhaps off eBay.  I have more than just carburetor-cleaning in mind,
too.
>
> On 4/24/2011 12:19 PM, Charles Scappaticci wrote:
>> Michael,
>>
>> Carbs gunk up, that's just a fact.  When I reinstalled my jetted
>> carbs, they had sat for a couple of years and I knew they weren't
that
>> clean when I had taken them off.  I had the local dealer do a
thorough
>> ultrasonic cleaning and reinstalled them.  Three years later, it
>> starts at the touch of the button on it's five year old battery.  I
>> can almost guarantee you it will run and start a lot better when they
>> are done.  The dealer here charges $75 per carb for cleaning (Vickery
>> Motorsports) and the ultrasonic cleaning will do better that you can.
>>
>> Charles S.
>>
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/johnsoliday%40msn.com
> You are subscribed at the email address JOHNSOLIDAY at msn.com
> ______________________________________________________________________
>
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/masonjs%40nrtco.net
> You are subscribed at the email address MASONJS at nrtco.net
> ______________________________________________________________________
> 


______________________________________________________________________
GENERAL GPZList MAILING LIST INFORMATION:
This is from the GPZList mailing list. GPZList at micapeak.com
http://micapeak.com/mailman/listinfo/gpzlist
You subscribed to this mailing list. Therefore, you solicited all
mail that you receive from this list. Therefore, ANY mail that you
receive from this list is, by definition, NOT Spam, and if you report
it as such, you are violating the micapeak.com terms of service. 

To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
______________________________________________________________________
YOUR PERSONAL SUBSCRIBER OPTIONS:
Unsubscribe or choose new options at
http://micapeak.com/mailman/options/gpzlist/art.robinson%40rogers.com
You are subscribed at the email address ART.ROBINSON at rogers.com
______________________________________________________________________