Sticking clutch plate issue

[John Soliday]

Glad to hear you fixed the Clutch issue.  Here's some advice for us "frugal"
bikers that I used to use on the race bikes as we were always opening cases
with no serious oil pressure behind them.  When I install a fiber case
gasket, I always spread a thin coat of automotive (blue type) silicon seal
on BOTH sides of the gasket.  It helps with sealing and it also allows one
to peal the gasket off the metal surfaces without ripping, and then you
reinstall, adding again, a thin coat of the silicon sealant.  I used gaskets
easily a half dozen times with this technique.

Cheers,

John (been working too much with my British design team ;-)

-----Original Message-----
From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com] On
Behalf Of Les Johnson
Sent: Saturday, May 14, 2011 4:33 PM
To: John Soliday
Subject: Sticking clutch plate issue

    I changed out my friction disks on my clutch and solved the
sticking problem. It was a real simple job to do. I made the mistake
that I could get the case off and not damage the gasket. Ended up
having to wait for new case gasket so bike laid up longer than I had
planned.

    Les J
______________________________________________________________________
GENERAL GPZList MAILING LIST INFORMATION:
This is from the GPZList mailing list. GPZList at micapeak.com
http://micapeak.com/mailman/listinfo/gpzlist
You subscribed to this mailing list. Therefore, you solicited all
mail that you receive from this list. Therefore, ANY mail that you
receive from this list is, by definition, NOT Spam, and if you report
it as such, you are violating the micapeak.com terms of service. 

To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
______________________________________________________________________
YOUR PERSONAL SUBSCRIBER OPTIONS:
Unsubscribe or choose new options at
http://micapeak.com/mailman/options/gpzlist/johnsoliday%40msn.com
You are subscribed at the email address JOHNSOLIDAY at msn.com
______________________________________________________________________