Wheel change torque

[Ped]

Hej Art,

According to the manual, the numbers should be these:

Front wheel axle nut: 98 Nm (10 kg/m or 72 ft/lb)
Front wheel pinch bolts: 20 Nm (2.0 kg/m or 14.5 ft/lb)
Front caliper mount bolts: 34 Nm (3.4 kg/m or 25 ft/lb)
Rear wheel axle nut: 110 Nm (11 kg/m or 80 ft/lb)
Rear brake caliper bolts: 25 NM (2.5 kg/m or 18 ft/lb)

Ped
'96 "Black Stealth" GPZ
Denmark


------ Original Meddelelse ------
Fra: "Art Johnson" <arthjohnson270 at gmail.com>
Til: "ped" <gpz1100abs at gmail.com>
Sendt: 23-06-2024 15:49:37
Emne: Wheel change torque

>Hello,
>Can anyone post torque values for:
>Front wheel axle nut & pinch bolts
>Front caliper mount bolts
>Rear wheel axle nut
>Rear brake caliper bolts
>Thanks!
>______________________________________________________________________
>GENERAL GPZList MAILING LIST INFORMATION:
>This is from the GPZList mailing list. GPZList at lists.micapeak.com
>https://lists.micapeak.com/mailman/listinfo/gpzlist
>You subscribed to this mailing list. Therefore, you solicited all
>mail that you receive from this list. Therefore, ANY mail that you
>receive from this list is, by definition, NOT Spam, and if you report
>it as such, you are violating the lists.micapeak.com terms of service.
>
>To unsubscribe, you may send email to gpzlist-unsubscribe at lists.micapeak.com
>______________________________________________________________________
>YOUR PERSONAL SUBSCRIBER OPTIONS:
>Unsubscribe or choose new options at
>https://lists.micapeak.com/mailman/options/gpzlist/gpz1100abs%40gmail.com
>You are subscribed at the email address gpz1100abs at gmail.com
>______________________________________________________________________