Rubber Chain Guard FUBAR- HELP!!
Paul Heim
pmheimjr at gmail.com
Wed Jul 29 14:15:00 PDT 2026
Bob! I didn’t know that you were still subscribed to the mailing list! Do you still have your Buellyses?
Regards,
Paul
Sent from my iPhone
> On Jul 29, 2026, at 1:22 PM, Bob Sims <bob.sims at gmail.com> wrote:
>
> Wow! Seeing this was a blast from the past...
>
> Here is an interesting solution, appears 3D printed by a guy in England:
> https://www.ebay.com/itm/326777538624
>
> Hope this helps.
>
> Bob
>
> -----
> Bob Sims
> bob.sims at gmail.com
>
> -----
>
>
>> On Tue, Jul 28, 2026 at 12:00 PM <gpzlist-request at lists.micapeak.com> wrote:
>>
>>
>>
>> Date: Mon, 27 Jul 2026 20:50:02 -0400
>> From: William K Denton <wkdenton at verizon.net>
>> To: List GPZ <gpzlist at lists.micapeak.com>
>> Subject: Rubber Chain Guard FUBAR- HELP!!
>> Message-ID: <8AAA67DE-9F8A-4772-90BA-18A6CF7B81CA at verizon.net>
>> Content-Type: text/plain; charset=utf-8
>>
>> Hello list. I hope I’m not the only one left here with a running GPz1100.
>>
>> So, while removing the swingarm, the rubber chain guard (p/n 55020-1529)
>> that apparently protects the swing arm from abrasion by a loose chain,
>> literally fell apart into 5 pieces, one of which must’ve flown off the bike
>> a while ago. Of course, this part is NLA, so I’m looking for any and all
>> advice on how to proceed protect the top (and bottom) of the SA after
>> re-assembly w/o this piece. I was thinking about fashioning SA protectors
>> out of thick neoprene strips top and bottom, but I’m wondering how to
>> fasten them in place. I’m thinking that drilling the SA to accept small
>> screws might compromise strength, but other wise the only thing I can think
>> of is to epoxy them onto the SA, but I’m worried that if one comes loose it
>> has the potential to jam the chain at one of the sprockets, thus causing a
>> massive ejection of me from the vehicle.
>>
>> Any and all suggestions and advice is appreciated.
>>
>> Bill in Yardley, PA
>> 1996 GPz1100
>>
>> Sent from my iPhone
>>
>>
>> End of GPZList Digest, Vol 185, Issue 1
>> ***************************************
>>
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at lists.micapeak.com
> https://lists.micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the lists.micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at lists.micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> https://lists.micapeak.com/mailman/options/gpzlist/pmheimjr%40gmail.com
> You are subscribed at the email address pmheimjr at gmail.com
> ______________________________________________________________________
More information about the GPZList
mailing list