[Tanx] Another CDI?

[Milt Rudy via Tanx]

Have you queried the Transalp forum? I remember getting lots of (usually)
good advice on the 2 TAs I had. Wish I still had the '90 Moonstone.
Milt

On Fri, Jun 24, 2016 at 8:40 PM, Tracy Cerrato via Tanx <tanx at micapeak.com>
wrote:

> Ok guys/gals -
> Everyone with a Transalp knows that the CDI’s need to be replaced around
> the 25k-30k mark. We’ve done all 4 of them on our 2 TA’s and there is no
> way any of them should be going bad this soon… except if we don’t have the
> new CDI’s mounted in the upgraded rubber holders that change their position
> to keep them from getting squished. I ordered the “new” holders last year
> and when I looked under the seat, it seemed like we had received the “old”
> style instead. Didn’t do anything about it right away and then forgot about
> it - until 2 nights ago, riding to and from work, half the console lighting
> was out and then the bike kicked down to one cylinder for a bit and then
> came back up to two. Anyone know if it’s too late to save the affected CDI
> by making the switch to “Unsquished” now that it’s already buggered out
> once???
> Tracy
>
>
> _______________________________________________
> Tanx mailing list
> Tanx at micapeak.com
> http://micapeak.com/mailman/listinfo/tanx
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://micapeak.com/pipermail/tanx/attachments/20160624/fc064b65/attachment.html>