Igniter Wires

[Andrew Smith]

Most of my info on the topic (all of it that pertains to the 1100 mill)
comes from the bigbikeworld.com
forum.  There's a section just for 1100 modifications, and a thread in that
section dedicated to stick coils.  There are some decent pictures in there.

It is not like any dyna coils I've ever seen.  You no longer have any spark
plug wires, just two normal wires from the harness to trigger the spark, the
same as runs to each coil.

Andy


On 5/4/07, Julian Solomensky <jsolo at solo-tek.com> wrote:
>
> Andrew, do you have a picture of what a stick coil looks like?  Or is it
> like the dyna coils that take a separate wire/boot at both ends (coil and
> plug)?
>
> Friday, May 4, 2007, 10:05:33 PM,  Andrew wrote:
>
> > I've heard that pretty much any Suzuki, Kawasaki, or Honda stick coils
> fit
> > and function perfect for the ZX11, so they should work for our
> GPZs.  Just
> > makes sure not to run Yamaha, as the resistance is too low (CDI) and may
> > damage the igniter box.
> > Andy (in Indiana)
>
>
>