Igniter Wires

[Julian Solomensky]

Hello Andrew,

You're talking about COP ignition I think.  There's no longer any spark plug wires needed because the coil is right there.  The wires off the harness drive the coil which fires the plug directly.  COP - Coil On Plug.   Most cars with distributorless ignition have this type of setup.

Saturday, May 5, 2007, 4:37:38 PM, you wrote:

> Most of my info on the topic (all of it that pertains to the 1100 mill)
> comes from the bigbikeworld.com
> forum.  There's a section just for 1100 modifications, and a thread in that
> section dedicated to stick coils.  There are some decent pictures in there.

> It is not like any dyna coils I've ever seen.  You no longer have any spark
> plug wires, just two normal wires from the harness to trigger the spark, the
> same as runs to each coil.

> Andy


> On 5/4/07, Julian Solomensky <jsolo at solo-tek.com> wrote:

>> Andrew, do you have a picture of what a stick coil looks like?  Or is it
>> like the dyna coils that take a separate wire/boot at both ends (coil and
>> plug)?




-- 
Best regards,
 Julian                            mailto:jsolo at solo-tek.com