Well, now I am in a pickle. fork disassembly tools

[1KPerDay]

Thanks Bill... good advice.

On 4/22/08, William K Denton <wkdenton at verizon.net> wrote:
> Jeff,
>
> Uh, NO, don't just snug it up.  You need to torque that bottom Allen bolt to
> 45 lb.ft, and to do that you'll need to hold the damper ass'y from the
> inside with a tool, or a rear axle, or what ever you'd like.  You should
> also replace or anneal the copper washer, and don't forget to apply locktite
> (blue) to the Allen bolt.
-- 
Utah Jeff
'96 SheePz1100