shifter seal
Charles Scappaticci
scapco at ecentral.com
Mon Apr 9 12:17:30 PDT 2012
John,
Here's one thing you can try. Many, many years ago, (okay, I'm dating
myself here), when I went to AMI, one of the instructors suggested a
fix for a leaky seal like yours. He suggested using a "slightly
smaller, slightly fatter" "O"-ring in place of the spring inside the
seal. Obviously, you can over do this weith one that is too small or
too tight, but it does work. Remember this was back in the days of
real Swedish Husqvarna's which would start leaking 15 minutes after
you bought the bike so it was used a lot. I ahve done this many times
and it works. YMMV.
Charles S.
On Mon, Apr 9, 2012 at 10:26 AM, John Soliday <johnsoliday at msn.com> wrote:
> Me too, as I've replaced it once already and it still leaks :-(. I bought
> two extra's and need to change the oil soon as well. Will try at least
> another couple of times before just giving up and letting the GPZ "mark it's
> spot forever" ;-)
>
> John
>
> -----Original Message-----
> From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com] On
> Behalf Of Randolph Peters
> Sent: Monday, April 09, 2012 10:16 AM
> To: John Soliday
> Subject: shifter seal
>
> Hi Guys,
> I just got in a replacement seal for my weeping shifter seal and I intend to
> replace it when doing an oil change today or tomorrow.
> I would therefore be grateful for any tips/techniques for removing the old
> one.
> Thanks.
> Randy from New Orleans,
> Ex GPZ
> Current ZZR 1200/
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all mail that
> you receive from this list. Therefore, ANY mail that you receive from this
> list is, by definition, NOT Spam, and if you report it as such, you are
> violating the micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/johnsoliday%40msn.com
> You are subscribed at the email address JOHNSOLIDAY at msn.com
> ______________________________________________________________________
>
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the micapeak.com terms of service.
>
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/scapco%40ecentral.com
> You are subscribed at the email address SCAPCO at ecentral.com
> ______________________________________________________________________
>
More information about the GPZList
mailing list