shifter seal

[Alex]

mine leaked, got fixed, leaked again, got fixed, leaked.. I just live with it. it's not a lot.

On 9 avr. 2012, at 21:24, John Soliday <johnsoliday at msn.com> wrote:

> Charles,
> 
> That's a good idea since I have two more seals.  I think I'll try one more
> stock seal and then if that doesn't work try your o-ring within an o-ring
> idea.  Does anyone have a GPZ that doesn't leak "some" at the shifter?
> Maybe mine is "special", but it seems like the shaft wiggles back and forth
> more than it should for an o-ring to properly seal it.  I can't think the
> bearings inside are worn out with only ~ 5K on the clock, but maybe there is
> a manufacturing defect inside mine....:-(.  There is also a possibility I
> "dinged" the shifter shaft getting the other seal out, as it was a bitch to
> pull out.  If there is a "ding" on the shaft maybe I could fill it in with a
> little JB weld and sand it off smooth....just thinking as I really want the
> GPZ to leak less than the Vrod (which leaks zero ;-), or the KLR which leaks
> "acceptable", also from the shift shaft (damn Kawasaki's ;-)
> 
> John
> 
> -----Original Message-----
> From: gpzlist-bounces at micapeak.com [mailto:gpzlist-bounces at micapeak.com] On
> Behalf Of Charles Scappaticci
> Sent: Monday, April 09, 2012 1:18 PM
> To: John Soliday
> Subject: Re: shifter seal
> 
> John,
> 
> Here's one thing you can try.  Many, many years ago, (okay, I'm dating
> myself here), when I went to AMI, one of the instructors suggested a fix for
> a leaky seal like yours.  He suggested using a "slightly smaller, slightly
> fatter" "O"-ring in place of the spring inside the seal.  Obviously, you can
> over do this weith one that is too small or too tight, but it does work.
> Remember  this was back in the days of real Swedish Husqvarna's which would
> start leaking 15 minutes after you bought the bike so it was used a lot.  I
> ahve done this many times and it works. YMMV.
> 
> Charles S.
> 
> On Mon, Apr 9, 2012 at 10:26 AM, John Soliday <johnsoliday at msn.com> wrote:
>> Me too, as I've replaced it once already and it still leaks :-(.   I 
>> bought two extra's and need to change the oil soon as well.  Will try 
>> at least another couple of times before just giving up and letting the 
>> GPZ "mark it's spot forever" ;-)
>> 
>> John
>> 
>> -----Original Message-----
>> From: gpzlist-bounces at micapeak.com 
>> [mailto:gpzlist-bounces at micapeak.com] On Behalf Of Randolph Peters
>> Sent: Monday, April 09, 2012 10:16 AM
>> To: John Soliday
>> Subject: shifter seal
>> 
>> Hi Guys,
>> I just got in a replacement seal for my weeping shifter seal and I 
>> intend to replace it when doing an oil change today or tomorrow.
>> I would therefore be grateful for any tips/techniques for removing the 
>> old one.
>> Thanks.
>> Randy from New Orleans,
>> Ex GPZ
>> Current ZZR 1200/
>> ______________________________________________________________________
>> GENERAL GPZList MAILING LIST INFORMATION:
>> This is from the GPZList mailing list. GPZList at micapeak.com 
>> http://micapeak.com/mailman/listinfo/gpzlist
>> You subscribed to this mailing list. Therefore, you solicited all mail 
>> that you receive from this list. Therefore, ANY mail that you receive 
>> from this list is, by definition, NOT Spam, and if you report it as 
>> such, you are violating the micapeak.com terms of service.
>> 
>> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com 
>> ______________________________________________________________________
>> YOUR PERSONAL SUBSCRIBER OPTIONS:
>> Unsubscribe or choose new options at
>> http://micapeak.com/mailman/options/gpzlist/johnsoliday%40msn.com
>> You are subscribed at the email address JOHNSOLIDAY at msn.com 
>> ______________________________________________________________________
>> 
>> ______________________________________________________________________
>> GENERAL GPZList MAILING LIST INFORMATION:
>> This is from the GPZList mailing list. GPZList at micapeak.com 
>> http://micapeak.com/mailman/listinfo/gpzlist
>> You subscribed to this mailing list. Therefore, you solicited all mail 
>> that you receive from this list. Therefore, ANY mail that you receive 
>> from this list is, by definition, NOT Spam, and if you report it as 
>> such, you are violating the micapeak.com terms of service.
>> 
>> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com 
>> ______________________________________________________________________
>> YOUR PERSONAL SUBSCRIBER OPTIONS:
>> Unsubscribe or choose new options at
>> http://micapeak.com/mailman/options/gpzlist/scapco%40ecentral.com
>> You are subscribed at the email address SCAPCO at ecentral.com 
>> ______________________________________________________________________
>> 
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all mail that
> you receive from this list. Therefore, ANY mail that you receive from this
> list is, by definition, NOT Spam, and if you report it as such, you are
> violating the micapeak.com terms of service. 
> 
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/johnsoliday%40msn.com
> You are subscribed at the email address JOHNSOLIDAY at msn.com
> ______________________________________________________________________
> 
> ______________________________________________________________________
> GENERAL GPZList MAILING LIST INFORMATION:
> This is from the GPZList mailing list. GPZList at micapeak.com
> http://micapeak.com/mailman/listinfo/gpzlist
> You subscribed to this mailing list. Therefore, you solicited all
> mail that you receive from this list. Therefore, ANY mail that you
> receive from this list is, by definition, NOT Spam, and if you report
> it as such, you are violating the micapeak.com terms of service. 
> 
> To unsubscribe, you may send email to gpzlist-unsubscribe at micapeak.com
> ______________________________________________________________________
> YOUR PERSONAL SUBSCRIBER OPTIONS:
> Unsubscribe or choose new options at
> http://micapeak.com/mailman/options/gpzlist/af%40genevainformation.ch
> You are subscribed at the email address AF at genevainformation.ch
> ______________________________________________________________________